| Size | 40mm/12 | 50mm/2" | 80mm/3" |
| Flow Range | 25~250L/mi n | 55-550 L/min | 115-1150 L/min |
| Volume Per Revolution | 0.309L | 0.681L | 1.839L |
| Max Pressure | 10Bar | 10Bar | 10Bar |
| Accuracy | ±0.2% | ±0.2% | ±0.2% |
| Repeatability | ±0.2% | ±0.2% | ±0.2% |
| Standard Measurement | 升/美加仑/英加仑 | Liter/US Gallon/IMP Gallon | Liter/US Gallon/IMP Gallon |
| Dimension | 51 X46X49 cm | 51 X46X49cm | 58x50X61cm |
| Net Weight | 23kg | 26kg | 40kg |
| Gross Weight | 25kg | 28kg | 47kg |
| Package | 1 pc/Strong Yellow Paper Carton/Wood | 1 pc/Strong Yellow Paper Carton/Wood | 1 pc/Strong Yellow Paper Carton/Wood |
The outstanding stepless fine-tuning device (wear compensation device) enables positive and negative calibration of the flowmeter.
High precision and high repeatability within a wide range; extremely high precision when maintaining a constant flow rate.
Low maintenance, low wear, long lifespan.
The measurement accuracy is not affected by changes in temperature, pressure or viscosity.
The flowmeters feature a simple and efficient measurement design, consisting of a frame and three rotors that rotate synchronously within the measuring chamber. There is no metal-to-metal contact in the flow channel, eliminating any degradation in accuracy and providing a long service life. The rotors are supported by bearings in two bearing discs, and at the end of each rotor shaft is a timing gear. Then the timed rotation between each rotor is transferred from the scale regulator to the register, resulting in consistent and highly accurate measurements.
EN
