| Parameter | 1.5" Low Pressure | 1.5" High Pressure | 1.0" Low Pressure | 1.0" High Pressure |
|---|---|---|---|---|
| Product Name | Stainless Steel Filter Housing | |||
| Port Size | 1.5" (DN40) | 1.5" (DN40) | 1.0" (DN25) | 1.0" (DN25) |
| Pressure Type | Low Pressure | High Pressure | Low Pressure | High Pressure |
| Closure Mechanism | Tri-Clamp (Quick Open) | Eyebolts & Nuts | Tri-Clamp (Quick Open) | Eyebolts & Nuts |
| Total Height | 42 cm (420 mm) | 43 cm (430 mm) | 62 cm (620 mm) | 63 cm (630 mm) |
| Body Diameter | 20 cm (200 mm) | 20 cm (200 mm) | 20 cm (200 mm) | 20 cm (200 mm) |
| Base Diameter | 27 cm (270 mm) | 27 cm (270 mm) | 27 cm (270 mm) | 27 cm (270 mm) |
| Inlet / Outlet Flow | Side-Inlet & Side-Outlet (Hose Barb / Threaded) | |||
| Top Configuration | Manual Air Vent / Pressure Relief Valve | |||
| Material | Stainless Steel (SS304 / SS316L Optional) | |||
This stainless steel filter is a heavy-duty inline filtration housing built for the continuous removal of particles, sludge and water from fuel, diesel, lubricating oil and other low-viscosity liquids. Each stainless steel filter body is fabricated from polished stainless steel and fitted with a reusable filter bag, so the housing can be opened, cleaned and put back into service instead of being replaced. Two port sizes (1 inch and 1.5 inch) and two pressure classes (low pressure and high pressure) cover the full range of fuel dispensing, fuel transfer and lubrication duty.
All four models share the same 20 cm cylinder diameter and the same 27 cm mounting flange, which keeps pipe routing, bracket design and spare-part stock identical no matter which stainless steel filter you select. The 1 inch models are supplied as tall 62 cm and 63 cm housings, while the 1.5 inch models use compact 42 cm and 43 cm housings for high-flow installations where space is limited. Low-pressure versions close with a quick-release clamp band for fast servicing; high-pressure versions use swing bolts and lifting rings to hold a stronger, gasket-tight seal under higher line pressure. The result is a compact, serviceable fuel filter housing for dispensers, and an equally dependable oil filter housing for lubrication equipment.
EN
